Electrophysical Laboratory

SUPERVISION AND SECURITY INTELLIGENT SYSTEM 

 Intelligent supervision and security system is intended for detection, warning and active prevention of trespassing attempts into the secured area. To increase operation efficiency and serviceability, protecting fence is divided into sections of no more than 250m length. Failure of one section does not influence on the normal functioning of the other sections.

SSIS COMPONENTS:

• video surveillance intelligent subsystem for video monitoring of the secured and adjacent areas;
• intelligent subsystemof active trespassing counteraction. HV-pulses generation in case of physical contact with the fence around the secured area;
• communication subsystem providing interaction of all system components and data transfer to the supervisory post;
• power supply subsystem providing 24/7 functioningof all subsystems (including stand-alone mode).

 

MAJOR FEATURES

• INTELLIGENT VIDEO SURVEILLANCE
• ACTIVE TRESPASSING PREVENTION
• CONTINIOUS WORK INCLUDING stand-alone MODE
• 24/7 MONITORING AND INFORMATION INTERCHANGE

 

WARNING SIGNALS ARE GENERATED IN CASE OF:

• approaching the secured area;
• touching the fence;
• short-circuit of fence wires between each other or ground fault;
• break of fence wires;
• attempt to put system equipment out of action.

Programmable warnings by events are also generated.

 

SSIS characteristics:

Distance of preliminary detection	Max 30m
Length of the controlled fence	No more than 8km per one control post
Recommended section length	200…250m
Height of high-voltage fence	2.5m
Supply voltage	220V
Power consumption of one section: in standby mode in impact mode	max100W max 300W
Impact current	5…100mА
Impact voltage	2000…4000V, 400Hz
Communication with supervisory post	Interface RS485 or Ethernet (fiber optic)

 

 SSIS model, shown on MILEX 2011: